Air horn tab for Weber 45 DCOE carburetors

Air horn tab for Weber 48 DCO/SP carburetors

Alfa Quadrifoglio Verde Mini-Stickers 10-pack (2cm)

Alfa Romeo Racing Sticker clover leaf (20mm x 18mm) on silver foil Small sticker, big impression: These high-quality mini-stickers feature the iconic Alfa Romeo Quadrifoglio Verde in a white triangle with silver border. Each sticker is approx. 2 cm wide and comes with transfer foil for easy and precise application on almost any surface. Perfect for: Marking redlines on speedometers, tachometers or any instruments Dashboards, body panels, or interior trim Phones, laptops, and personal accessories An elegant detail for true Alfa enthusiasts - whether on classic cars, modern vehicles, or everyday objects.

Alternator new 50A lightweight / Bosch look until 1969

Alternator New 50 Ampere Alfa Romeo 750 / 101 - Models 105 1. Series Fits 1300 - 1600cc 750 / 101 / 105 models until 1969. This powerful alternator is more than 1.5 kg lighter than the original Bosch dynamo but keeps the original look. It has an aluminium pulley and body and does not require a control box as it is all built in. You can wire it directly (just 2 wires) or run it through the control box to keep the original look. It saves a lot of weight and gives you a far more powerful output (50 A instead of 25 A) than the original dynamo. An excellent upgrade for any dynamo/generator equipped car for modern driving conditions with added electrical accessories. Also useful for competiton cars where allowed by regulatons due to the weight saving and increased output.

Aluminium carburettor flange set Alfa Giulietta 750 Veloce

Set of 40 mm Aluminium Carburetor Flanges, 4 Pieces Suitable for Alfa Romeo 750 Giulietta 1300cc Veloce with twin carburetors Precision CNC Machined The intake flanges are precision CNC machined from aluminium and then black anodized. This protects the surface while maintaining an appearance close to the original. Durable Alternative to Rubber Flanges Unlike conventional rubber flanges, the aluminium flanges are resistant to the typical ageing effects caused by heat, oil, fuel vapours and vibration. Advantages: High-quality CNC machined aluminium Black anodized surface Permanently dimensionally stable and crack-resistant O-rings for sealing and vibration damping Complete installation set for 4 carburetor flanges Scope of Delivery: 4 aluminium carburetor flanges, 40 mm O-rings Mounting nuts Special spring washers Made in Europe

Aluminium Radiator 750 / 101 Giulietta Sprint

Radiator in Aluminium Alfa Romeo 750 Giulietta Sprint Only 5,35 kg

Aluminium Radiator 750 / 101 Giulietta Sprint Speciale

Radiator in Aluminium Alfa Romeo 750 Giulietta Sprint Speciale 101 Giulietta / Giulia Sprint Speciale Only 4,1 kg

ANSA Sport exhaust cpl. Alfa Romeo 750 / 101 Spider

ANSA Sport Exhaust System Exclusive by OKP Version with 6 holes 750 / 101 Giulietta / Giulia Spider Made in Italy

Battery switch (Kill switch) Hella GTA / GTAm

Master Switch HELLA (Made in Germany) Obligatory for all Race / Rally cars Prevents theft and unauthorized use of the vehicle. Reduces danger of fire / explosion. Facilitates the work on electrical systems Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Porsche

Bilstein Race shock absorber MONZA 750 / 101 front

BILSTEIN Exclusive for OKP Bilstein Sport shockabsorber Race MONZA front 750 + 101 models Giulietta / Giulieta Sprint Giulietta Giulia Spider Giulietta Ti Berlina Sprint Speciale Sprint Zagato Technology Made in Germany

Bilstein Race shock absorber MONZA 750 / 101 rear

BILSTEIN Exclusive for OKP Bilstein Sport shockabsorber Race MONZA rear 750 + 101 models Giulietta / Giulieta Sprint Giulietta Giulia Spider Giulietta Ti Berlina Sprint Speciale Sprint Zagato Technology Made in Germany

Bracket for SPAL electric ventilator

Brake fluid ATE Typ 200 New Racing fluid 1 Liter

1 Liter ATE TYP 200 DOT 4 New Racing Quality Boiling point min. 280 °C Wet boiling point min. 198 °C

Carburetor trumpet Weber 45DCOE 55mm length

Carburetor trumpet Weber 45DCOE 55mm length Superlight Aluminium air horn 45DCOE

Carburetor trumpet Weber 45DCOE 16mm length

Carburetor trumpet Weber 45DCOE 16mm length Superlight Aluminium air horn 45DCOE

Carburetor trumpet Weber 45DCOE 26mm length

Carburetor trumpet Weber 45DCOE 26mm length Superlight Aluminium air horn 45DCOE

Carburetor trumpet Weber 45DCOE 39mm length

Carburetor trumpet Weber 45DCOE 39mm length Superlight Aluminium air horn 45DCOE

Carburetor trumpet 40mm, 40mm long, open

Carburetor trumpet 40mm 40mm long Weber 40DCOE Dellorto 40 Solex 40

Carburetor trumpet 40mm, 60mm long, open

Carburetor trumpet 40mm, 60mm long, Weber DCOE Dellorto Solex

Carburetor trumpet mesh Weber 40DCOE 30mm length

Carburetor trumpet Weber 40DCOE 30mm length Superlight Aluminium air horn with mesh

Carburetor trumpet mesh Weber 45DCOE 30mm length

Carburetor trumpet Weber 45DCOE 30mm length Superlight Aluminium air horn with mesh

Clutch fluid reservoir 105 RHD + 1750 USA

Clutch / Brake fluid reservior 105 - Models RHD 1750 GTV Bertone USA 1750 Round tail Spider USA

Clutch kit 750 / 101 / 105 1. series / GTA

This new clutch kit fits all 750 / 101 models and also 105 1. series cars with mechanical / cable clutch (200mm). It replaces the original version by a kit including a modern clutch plate.

Donut protection cage 101 / 105 / 115

Propshaft Donut Lightweigt Cage Alfa Romeo 750 / 101 models 105 / 115 models GTA / GTAm We reccomend to use our Lightweight cage to protect the front prophaft donut at high revs. Helps to reduce the chance of damage the front coupling. Ideal for competition.

Emblem ALFA CORSE self adhesive (7 x 6cm)

Emblem ALFA CORSE 7cm x 6cm Fits all Alfa Romeo (self adhesive)

Exterior chrome mirror Californian right (universal)

Exterior mirror Californian chrome right side Vitaloni Version Californian Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

Exterior chrome mirror Californian left (universal)

Exterior mirror Californian chrome left side Vitaloni Version Californian Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

Exterior chrome mirror Vitaloni left / right (universal)

Exterior mirror right / left side Vitaloni chrome Alfa Romeo Alfa Romeo GTA / GTAM Racing Ferrari Fiat Lancia Lamborghini Maserati Talbot

Exterior chrome mirror Vitaloni left / right (universal)

Exterior mirror right / left side Vitaloni chrome Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Talbot

Exterior mirror Californian black left

Exterior mirror Californian black left side Vitaloni Versione Californian Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

Exterior mirror set Californian black

Exterior mirror set Californian black right and left side Vitaloni Versione Californian Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

External return spring kit for Weber DCOE carburetors

We are delighted to announce that we have just introduced an external return spring kit for the DCOE series of carburettors. Although fitted with internal return springs, many race scrutineers require the use of a visible external spring as well, and our new kit will simply, easily, cheaply and safely satisfy these requirements. The kit comprises a top spring mount specially designed to allow unrestricted access to the jet inspection cover.

Filter and gasket for electric fuel pump Mitsuba universal

Filter and gasket for electric fuel pump Mitsuba universal

Fitting fuel / oil hose with inner diameter 10mm

Fitting for fuel and oil hoses Diametre 20mm for hose with inner diametre 10mm Alfa Romeo Ferrari Fiat Lamborghini Lancia Maserati

Fitting fuel / oil hose with inner diameter 6mm

Fitting for fuel and oil hoses Diametre 16mm for hose with inner diametre 6mm Alfa Romeo Ferrari Fiat Lamborghini Lancia Maserati

Fitting fuel / oil hose with inner diameter 8mm

Fitting for fuel and oil hoses Diametre 18mm for hose with inner diametre 8mm Alfa Romeo Ferrari Fiat Lamborghini Lancia Maserati

Flame Thrower Ignition coil 12V Alfa Romeo 4 + 6 cylinder

The Flame-Thrower canister style coil has been engineered to complement our Ignitor Electronic Ignition Conversion Kits and Plug n Play Distributors. The Flame Thrower canister coil is designed to mate with the Ignitor Electronic Conversion Kit, but can benefit virtually any distributor type inductive systems. Higher voltage allows larger spark plug gap for added power, smoother response, and improved fuel economy. 40,000 volts. black For use with inductive ignition systems. 3.0 Ohm primary resistance

Flywheel Sport Steel 8 holes mechanical clutch 6,20 kg

Sport flywheel Steel Lightweight 6,20 KG Version for mechanical clutch Starter ring 105 teeth Diameter 200mm Material 42NiCrMo4 8 - holes mounting Alfa Romeo 1300 - 1600cc 105 / 115 Please note: Our flywheels are made in one piece including starter ring Made in Italy

Fuel pump connection D-06 (Bosch)

Steel bridge connection e.g. for Bosch pumps. Material: Aluminium Pump side connection: D-06 female thread Suction side connection: D-06 male thread Thread: 9/16-18 UNF (D-06) Abarth Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Also usable for all other cars with carburetor.

Fuel pump connection set (Facet) 1/4 NPT

Steel bridge connection e.g. for Facet Silver Top or Solid State pumps. Material: Steel Pump side connection: Hole for 1/4 NPT banjo bolt Suction side connection: D-06 male thread Scope of delivery: 2 bridge connections with D-06 connection, 4 banjo bolts 1/4 NPT, 8 sealing rings For AR 10 028 110 Abarth Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Also usable for all other cars with carburetor.

Fuel pump connection set (Facet) 1/8 NPT

Steel bridge connection e.g. for Facet Silver Top or Solid State pumps. Material: Steel Pump side connection: Hole for 1/8 NPT banjo bolt Suction side connection: D-06 male thread Scope of delivery: 2 bridge connections with D-06 connection, 4 banjo bolts 1/8 NPT, 8 sealing rings For AR 10 028 005 Abarth Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Also usable for all other cars with carburetor.

Fuel pump Facet High Performance (136 l/h)

Electric high performance fuel pump for carburetor engines. 136 Liter per Hour / 4 PSI (0,3 bar) pressure. banjo bolts: 1/8 NPT Abarth Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Also usable for all other cars with carburetor.

Fuel pump Facet High Performance (136 l/h) Kit

Electric high performance fuel pump for carburetor engines. 136 Liter per Hour / 4 PSI (0,3 bar) pressure. banjo bolts: 1/4 NPT Abarth Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati Also usable for all other cars with carburetor.

Fuel sender 12V universal adjustable AR / Ferrari

Fuel sender universal Lever-type level sensor Alfa Romeo Abarth Ferrari Fiat Lamborghini Lancia Maserati Can be used universally for other vehicles Made in Italy

Fuel sender Motometer universal adjustable 12V

Fuel sender Motometer universal Lever-type level sensor Diameter hole circle 54MM 150 - 600MM adjustable Lever-type level sensors are used in many vehicles and machines to record the current tank contents and to forward the evaluation result to the tank display. A float always moves on the surface of the liquid and, in so doing, changes the resistance value in the tank sensor. MOTOMETER lever-type level sensors are suitable for Diesel and gasoline fuels and are available in different versions. Operation is possible with an onboard 12 Volt or 24 Volt systems The resistance with Tank Full is 180 Ohm and with Tank Empty 3 Ohm. The version is grounded.

Fuel tank cap Abarth / Alfa Romeo / Ferrari / Maserati

Fuel tank cap Racing Universal Connection width 80mm Abarth Alfa Romeo Bizzarini Ferrari Fiat ISO Lancia Lamborghini Lancia Maserati

Headlight bowl 7″ plastic 750 / 101 / 105 / 102 / 106

Plastic headlight bowl / Racing For 7″ headlamps with 3 - mountings Lightweight 260 Gramms Alfa Romeo 750 / 101 Alfa Romeo 102 Alfa Romeo 106 Alfa Romeo GT / GTA Alfa Romeo Giulia Super Alfa Romeo Spider Alfa Romeo Berlina 1750 Can be used also for other Italian Classics as Ferrari Fiat Lamborghini Lancia Maserati

Intake rubber flange gasket reinforced 40mm REINZ

ORIGINAL REINZ Diameter 40mm 750 / 101 Typen 105 / 115 Typen Alfetta Giulietta Alfa 90 Made in Germany

K - Nut M10 x 1 spanner size 12

K-nut Locking nut M10 x 1 (6 point) Spanner size: 12 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M10 x 1,5 spanner size 12

K-nut Locking nut M10 x 1,50 (6 point) Spanner size: 12 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M12 x 1,5 spanner size 14

K-nut Locking nut M12 x 1,50 (6 point) Spanner size: 14 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M6 x 1 spanner size 7

K-nut Locking nut M6 x 1.0 (6 point) Spanner size: 7 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M7 x 1 spanner size 8

K-nut Locking nut M7 x 1,0 (6 point) Spanner size: 8 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M8 x 1 spanner size 10

K-nut Locking nut M8 x 1,0 (6 point) Spanner size: 10 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K - Nut M8 x 1,25 spanner size 10

K-nut Locking nut M8 x 1,25 (6 point) Spanner size: 10 mm Standard hexagonal K-nuts (235°C) Locking nut = result of elliptical deformation. Less material = reduced spanner size. This results in huge weight saving. Large flange to reduce the tension by distributing the force over a larger surface. The hexagonal M6 x 1.0 K-nut is an elliptically deformed self-locking nut typically used in motorsports and aerospace applications. Tolerance: 4H-5H Material: DIN 1.7220.3 - 35CrMo4 - AISI 4135/4137 Hardness: max. 44 HRC Class: 1100 MPa tensile strength Max temperature: 235°C = 455°F Surface: cadmium-plated + MoS2 low friction coating

K&N Filter for oil catch pan alu

19mm Filter / Ø 51mm / Höhe 38mm

Lowering spring set Eibach Alfa 750 / 101 Spider / Sprint

Original Eibach lowering kit Lowers the vehicle by approx. 30 mm The Eibach lowering kit provides a sporty and firm suspension setup with noticeably improved handling. By lowering the center of gravity by approx. 30 mm, body roll in corners is reduced, steering precision increases, and overall stability is enhanced. The springs are made of high-strength special steel and feature a precise spring rate, long-term durability, and exact fitment. Developed and manufactured to the highest Eibach quality standards - proven in motorsport and on the road. Alfa Romeo 750 / 101 Giulietta + Giulia Spider 750 / 101 Giulietta + Giulia Sprint Ideal for drivers seeking a balanced combination of sporty appearance, precise handling, and Eibachs renowned manufacturing quality. Made in Germany

Magnetic protection cover for fenders Alfa Romeo

Fender protection right or left (with magnetic fastening) Protects against damage such as paint scratches, bumps, dirt, etc. when working in the engine area PVC on the outside - velvet velour on the inside For all Alfa Romeo and other vehicles

Male throttle lever for Weber DCOE carburetors

Male throttle lever for Weber DCOE carburetors

Mounting captive washer for Weber 40 / 45 DCOE

Mounting Captive Washer for flexible carb mounting Dellorto, Solex, Weber 40 / 45 DCOE - Styles Used to allow DCOE style carburettors to be flexibly mounted Designed and manufactured to very specific thickness and depth to ensure superb performance in the most demanding of conditions. These are not to be confused with cheaper, inferior copies that are available. 2 cup washers required for each Rubber Grommet which can be seen under the Related Products tab OKP9900557

Mounting Rubber Grommet for carburetors 40 / 45 DCOE

Mounting Rubber Grommet Used to allow DCOE style carburettors to be flexibly mounted. Designed and manufactured to very specific levels of hardness and flexibility to ensure superb performance in the most demanding of conditions. These are not to be confused with cheaper, inferior copies that are available. Each grommet requires 2 x cups that can be found under OKP99005571

Oil catch pan alu 2l 200 x 150 x 70 mm

2 Ltr Alloy catch tank Sight glass 3x 13mm Inlet, Outlet & Breather M8 Drain boss 200 x 150 x 70 mm

Oil catch pan alu 2l universal with filter and mounting

Oil cooler adaptor flange GTA / GTAm / 105 1. serie

Oil cooler adapter flange Comes with the correct fittings Aluminium Race connections M16 x 1,5mm 750 / 101 - models GTA 1300 - 1600 GTAm 1750 105 - Models 1. Series

Oil filler cap with ventilation GTA / 101 / 105

Oil Filler Cap with Ventilation GTA - zinc-plated (Autodelta Version) High-quality, precisely manufactured oil filler cap made of zinc-plated steel. This reinforced racing version has been specially developed for demanding use in motorsport and high-performance road applications. Unlike many reproductions made from material that is too thin, this cap has the correct material thickness, ensuring a stable, vibration-resistant and heat-resistant fit. This guarantees a secure and tight seal even at high temperatures and engine speeds. The cap features an integrated ventilation system in GTA style, providing optimized crankcase ventilation - ideal for use in racing environments and performance-tuned engines. Includes a durable cork gasket for perfect sealing and long service life. Suitable for the following Alfa Romeo models: 1900 - types 2000 - types 2600 - types 750 / 101 - types 105 / 115 - types + GTA / GTAm Alfetta Limousine Alfetta GT / GTV / GTV6 Giulietta Made in Europe

Oil filler cap with ventilation GTA / 101 / 105 INOX

Oil Filler Cap with Ventilation GTA - Polished Stainless Steel (Autodelta Version) High-quality, precisely manufactured oil filler cap made of polished stainless steel. This reinforced racing version has been specially developed for demanding use in motorsport and high-performance road applications. Unlike many reproductions made from material that is too thin, this cap has the correct material thickness, ensuring a stable, vibration-resistant and heat-resistant fit. This guarantees a secure and tight seal even at high temperatures and engine speeds. The cap features an integrated ventilation system in GTA style, providing optimized crankcase ventilation - ideal for use in racing environments and performance-tuned engines. Includes a durable cork gasket for perfect sealing and long service life. Suitable for the following Alfa Romeo models: 1900 - types 2000 - types 2600 - types 750 / 101 - types 105 / 115 - types + GTA / GTAm Alfetta Limousine Alfetta GT / GTV / GTV6 Giulietta Made in Europe

Oil pan for Differential Autodelta 1300 - 1750

AUTODELTA - Style Aluminum Oil Pan for Alfa Romeo More than double the oil capacity - more performance, more protection! Fits: Alfa Romeo 1300cc - 1750cc: 750 Giulietta 101 Giulietta / Giulia Bertone Spider Giulia Berlina This high-performance aluminum oil pan from AUTODELTA is a smart upgrade for your classic Alfa Romeo. Thanks to the significantly increased oil volume and pronounced cooling fins, oil temperatures stay lower even under heavy load - perfect for spirited driving, hot weather, and long-distance journeys. Key Benefits: Lower oil temperature - improved heat dissipation Increased oil reserve - added safety under stress Better lubrication - protects engine and components A must-have upgrade for Alfa Romeo enthusiasts who value performance and durability!

OKP Racing Club FIA sticker set

OKP Racing Club FIA Sticker set

Overflow container Aluminium Race GTA / GTAm

Overflow container in aluminium (Universal) Alfa Romeo 105 / 115 - Models GT / GTV / GTC / GTA / GTAm Can be used on many car types Size: 200mm x 100mm Standard Radiator Cap Top 10mm In 18mm Out 8 mm Over Flow Pipe Please use AR 10 036 303 as radiator cap

Overflow container Aluminium Race GTA / GTAm

Overflow container in aluminium (Universal) Alfa Romeo 105 / 115 - Models GT / GTV / GTC / GTA / GTAm Can be used on many car types Size: 200mm x 100mm Standard Radiator Cap Top 10mm In 18mm Out 8 mm Over Flow Pipe Please use AR 10 036 303 as radiator cap

Prototipo dished silver spokes black leather 350mm

Original MOMO Prototipo Steering wheel 350mm Diameter Black leather with dished spokes. Available for following cars: Alfa Romeo, Ferrari , Fiat, Lancia, Porsche, Lamborghini, Maserati, BMW and many others. Please ask for steering hubs and horn buttons.

Racing seat Nürburgring black cloth

A new edition of the typical sports seat of the 60s and 70s Seats in a similar design have been used by many manufacturers and racing teams Not suitable for cabrio cars (sunlight sensitive material)

Rubber mount for fuel pump / air filter / radiator etc

Rubber mount for Electrical fuel pumps Radiators Air filter housings Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

Rubber mount for fuel pump / air filter / radiator etc

Rubber mount for Electrical fuel pumps Radiators Air filter housings Alfa Romeo Ferrari Fiat Lancia Lamborghini Maserati

Sabelt Corse dished spokes black suede 350mm

Original Sabelt Corse Steering wheel 350mm Diameter Black suede leather with dished spokes. Available for following cars: Alfa Romeo, Ferrari , Fiat, Lancia, Porsche, Lamborghini, Maserati, BMW and many others. Please ask for steering hubs and horn buttons.

Sabelt Corse dished spokes black suede 350mm

Original Sabelt Corse SW - 465 Steering wheel 350mm Diameter Black suede leather with dished spokes. Available for following cars: Alfa Romeo, Ferrari , Fiat, Lancia, Porsche, Lamborghini, Maserati, BMW and many others. Please ask for steering hubs and horn buttons.

Set (2) wheel spacers 101 / 105 / 115 (2 x 5mm)

10mm track extenders per Axle (4 x 108mm) 2 x 5mm

Set (3) stainless steel flexi brake hoses 750/101/105 TÜV

Set stainless steel flexi brake hoses (TÜV approved) Improving of the brake pedal. Alfa Romeo 750 / 101 Giulietta / Giulia 105 / 115 GT Bertone / Giulia / Berlina / Spider 105 Montreal 105 Junior Zagato Made in Germany

Set (4) Carburetor trumpet 48mm, 48mm long, open

Kit carburetor trumpet 48mm in aluminium 48mm long Weber 48DCOE Dellorto 48 Solex 48

Set carburetor trumpets 40mm (Sprint Filter) DCOE

Version zum Aufschrauben. Inklusive Verbindungsplatte und Montagekit.

Set carburetor trumpets 45mm (Sprint Filter) DCOE

Version zum Aufschrauben. Inklusive Verbindungsplatte und Montagekit.

Set rubber washers for T-bar Polyurethane 1300 - 2000

Set Polyurethane rubber washers Alfa Romeo 1300cc - 1600cc 750 / 101 4x T-Bar 1300cc - 2000cc 105 / 115 2x T-Bar

Set valve shims (2,525 - 3,500mm) Twinspark 8mm

2,525 - 3,500mm 200 pcs.

Set wheel spacers 101 / 105 / 115 (2 x 10mm)

20mm track extenders per Axle (4 x 108mm) 2 x 10mm

Set wheel spacers 101 / 105 / 115 (2 x 10mm)

20mm track extenders per Axle (4 x 108mm) 2 x 10mm

Set wheel spacers 101 / 105 / 115 (2 x 15mm)

30mm track extenders per Axle (4 x 108mm) 2 x 15mm

Set wheel spacers 101 / 105 / 115 (2 x 20mm)

40mm track extenders per Axle (4 x 108mm) 2 x 20mm

Set wheel spacers 101 / 105 / 115 (2 x 7mm)

14mm track extenders per Axle (4 x 108mm) 2 x 7mm

SPAL electric pull fan 210 mm

Mounting depth: 5cm

SPAL electric pull fan 245mm + GTV6

Fits also for Alfetta GTV6 2 pieces per car Mounting depth: 5cm

SPAL electric pull fan 335mm

2250m³/h Mounting depth: 5cm

SPAL electric push fan 210 mm

Mounting depth: 5cm

SPAL electric push fan 245mm

Mounting depth: 5cm

SPAL electric push fan 310mm

Mounting depth: 5cm

SPAL electric push fan 335mm

1450m³/h Mounting depth: 5cm

Spin On Oil Filter Conversion Kit 1300 / 1600 / 1750

Available as a direct fit for all 1300, 1600 & 1750 engines with cartridge type oil filter housings to allow the use of a spin-on filter. Comes complete with orig. oilfilter and gasket. 750 / 101 / 105 models 1300cc 1600cc 1750cc Advantages: - modern oil filter for efficient filtration performance - fast and easy filter changing - saves weight and space - unproblematic availability of proper oil filters.

Sport front sway bar 25mm 750 / 101 Spider + Sprint + SS

Sport front sway bar 25mm Alfa Romeo 750 / 101 - Typen Giulietta Berlina Giulietta / Giulia Spider Giulietta / Giulia Sprint Giulietta SS Giulietta SZ

Sport header 1750 / 2000cc engines for 750 / 101 models

Performance Header for 1750 / 2000cc Conversion Specially designed performance header for installing a 1750 or 2000cc engine into an Alfa Romeo 750/101 Giulietta/Giulia chassis. Ceramic Coated Manufactured with continuous mandrel-bent tubing and heavy-duty thick flanges for a durable, leak-free seal - without the need for special gaskets. The headers feature a premium 1500° ceramic coating that can reduce surface temperatures by up to 38 °C. The coating offers a brilliant silver finish with an appearance very close to chrome. At the same time, it remains flexible and highly durable, preventing cracks even if the tubes are slightly bent. Made in USA

Sport header 1750 / 2000cc engines for 750 / 101 models

Performance Header for 1750 / 2000cc Conversion Specially designed performance header for installing a 1750 or 2000cc engine into an Alfa Romeo 750/101 Giulietta/Giulia chassis. Manufactured with continuous mandrel-bent tubing and heavy-duty thick flanges for a durable, leak-free seal - without the need for special gaskets. Made in USA