Alfa Special tool cylinder head removal tool 101 / 105
Alfa Romeo Head Removal Tool 4-Cylinder Cylinder head removal tool. Fits all 4-cylinder cars. Threaded rod screws into spark plug hole, plate rests on 4 head studs, and tightening the nut pulls the cylinder head free neatly and cleanly. Made in Italy
Cylinder head extractor bracket 101 / 105 / 115 / Alfa 75
Cylinder head extractor bracket (INOX) Alfa Romeo 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 75 Alfa 90
Cylinder head extractor bracket 101 / 105 / 115 / Alfa 75
Cylinder head extractor bracket (INOX) RACING VERSION (Lightweight) Alfa Romeo 101 - Models 105 / 115 - Models GTA / GTAm Alfetta Giulietta Alfa 75 Alfa 90
Cylinder head extractor bracket Alfa Romeo GTA
Cylinder head extractor bracket Alfa Romeo GTA
Cylinder head new Alfa Romeo GTA 1300 / 1600
Cylinderhead Alfa Romeo GTA 1300 - 1600 Twinspark. Comes without valve guides and seats. Developed and produced exclusively by our partner Capricorn The cutting-edge technological capabilities in our workshop enables us to attain a high degree of precision in all we produce. Thus we may do mechanical processing on high end crankcases and cylinder heads in niche series production. Over 180 HP / 180 Nm are possible with our cylinder heads made out of state-of-the-art alloys and optimized combustion chambers. They fit original bases. It is possible to mount waves with max. 14 mm valve lift. Made in Germany
Cylinder head new GTAm 1750 Testa Stretta
Cylinderhead Alfa Romeo 1750 GTAm TESTA STRETTA Original Version for 1750 GTAM with 86,60mm bore and Mono Sleeve cylinder. Comes without valve guides and seats. Developed and produced exclusively by our partner Capricorn - Germany. The cutting-edge technological capabilities in our workshop enables us to attain a high degree of precision in all we produce. Thus we may do mechanical processing on high end crankcases and cylinder heads in niche series production. Over 220 HP are possible with our cylinder heads made out of state-of-the-art alloys and optimized combustion chambers. They fit original bases. Made in Germany
Cylinder head nut 1300 - 1600cc. 101 / 105 / 115 + M
Cylinder head nut Alfa Romeo 1300 - 1600cc. 101 /105 / 115 - Models Alfetta Giulietta Montreal and others Made in Italy
Cylinder head nut 1750 - 2000 105 / 115 / 116 / 75 etc.
Cylinder head nut Alfa Romeo Reinforced Quality 1750- 2000cc. 105 / 115 - Models Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 and others Made in Italy
Cylinder head stud 1300cc -- 101/105
Cylinder head stud Alfa Romeo 1300cc. 101 - Models 105 - Models
Cylinder head stud reinforced 1600cc 12.9 NM
Reinforced cylinder head stud for 1600cc 101 / 105 / 115 / 116 models Rolled threads on both ends - 12.9 tensile strength For racing & standard engines. 10 pcs. needed per engine
Cylinder head stud reinforced 1750 - 2000cc. 12.9NM
Reinforced cylinder head stud for 1750 - 2000cc 105 / 115 / 116 models Rolled threads on both ends - 12.9 tensile strength For racing & standard engines 10 pcs. needed per engine
Exhaust manifold stud 105 / 115 / 116 / 75
Exhaust manifold stud 34mm to suit all Alfa Romeo 4 cylinder models 1900 / 2000 750 / 101 105 / 115 116 75 2600 inlet side
Fine threaded nut M8 x 1 (12mm) zincked
Fine thread nut M8 x 1 - spanner size 12 - zinc-plated steel Hex nut with metric fine thread M8 x 1 and reduced 12 mm spanner size. Thanks to the smaller spanner size, this nut is especially suitable for hard-to-reach or tight installation areas, as often found in engine and cylinder head applications. Compared to nuts with a larger spanner size, size 12 allows easier tool access even where space is limited. This high-quality zinc-plated steel nut offers corrosion protection and is suitable for fine-thread connections in engine and automotive applications. Technical data: Thread: M8 x 1 (metric fine thread) Spanner size: 12 mm (reduced) Material: steel Surface: zinc-plated Design: hex nut Advantage: reduced spanner size for better accessibility in confined spaces ideal for engine and cylinder head assembly. Made in Italy
Intake manifold GTAM / Testa Stretta for Weber 45 / 48mm
Autodelta Intake Manifold OKP - Facetti Alfa Romeo 1750 - 2000cc GTAm / Testa Stretta For Weber DCOE 45 or Weber DCO 48mm Carburetors
Intake manifold stud 101 / 105 / 115 / 116 / 75
Inlet manifold stud 37mm to suit all Alfa Romeo 4 cylinder models 750 / 101 105 / 115 116 75 2600 exhaust side Also fits 2x rear cam shaft cover 105 / 115 models
New original Alfa Romeo cylinder head 1600cc carb.
Cylinder head comes with valve guides + seats Original Alfa Romeo 96411366 NOS - New Old Stock Alfa Romeo 1600cc. Spider Alfetta Alfa 75
Oil sump plug differential + gearbox 750 / 101 / 105
Oil drain plug / oil filler plug for differential and gearbox Magnetic sealing plug for secure sealing of the oil drain or oil filler opening. Suitable for Alfa Romeo: 2600 series (oil pump) 750 / 101 series 102 / 106 series 105 / 115 series Alfetta / GTV Giulietta Alfa 75 Thread specification M22 × 1.5 The integrated magnetic element collects metallic wear particles circulating in the oil system and helps reduce wear within the drivetrain.
Oil sump plug differential + gearbox 750 / 101 / 105
Oil drain plug / oil filler plug for differential and gearbox Sealing plug for secure closure of the oil drain or oil filler opening, also used in the cylinder head. Suitable for Alfa Romeo: 2600 series (oil pump) 750 / 101 series 102 / 106 series 105 / 115 series Alfetta / GTV Giulietta Alfa 75 Thread specification M22 × 1.5
Set cylinder head studs Testa Stretta 1300 GTA
Reinforced cylinder head studs for 1300cc GTA For testa stretta racing engines. Made in Italy
Stud bolt between engine and gearbox 105 /115 /116
Stud bolt between engine and gearbox Alfa Romeo 105 / 115 - Modeks Alfetta Giulietta Alfa 75 Alfa 90
Valve cover aluminium 1300-2000 GTA / GTAm
Valve cover aluminium Weight only 1900 Gram 1300 - 2000 GTA / GTAm TESTA STRETTA Made in Germany
Valve cover screw 2600 / 101 / 105 Racing
Allen Screw for valve cover (Racing) Weight only 9,5 Gramm Alfa Romeo 2600 (106) 1300 / 1600 Giulietta + Giulia (101) 1300 - 1750 (105) GTA / GTAM Made in Italy
In the cylinder head category you'll find cylinder heads, valve covers, studs, and bolt kits for a wide range of classic Alfa Romeo engines. Whether you're looking for refurbished cast heads, newly manufactured units, or replacement heads for inline-four, inline-six, or V6 engines – all parts are built to ensure tight tolerances, thermal stability, and long-term reliability.
Our valve covers are available in both OEM specification and refined versions, including bead-blasted, polished, or anodized finishes. We also offer high-strength head studs, nuts, and bolt kits for secure, stress-free installation – ideal for restorations, engine builds, or high-performance use.