Athesil RTV Silicone Sealant 80 ml

Athesil, the brand new RTV (Room-Temperature-Vulcanizing Silicone) meets the specific needs of professional technicians and mechanics in the automotive, nautical, motorcycle, industrial and off-road markets. Born to be the premium choice for every professional in the world of engines, it is extremely versatile, and it is the ultimate solution for maintenance and repair. Athesil joins, seals, repairs, corrects, fixes, and can be used as FIPG (formed-in-place gasket) for sealing and adhesion of glass, plastic or metal components, crankcases, pumps and flanges. After polymerization, Athesil forms a resistant, flexible and waterproof silicone rubber seal that perfectly resists aging, atmospheric agents and thermal cycles while remaining permanently elastic. Fluid resistant and thermally stable, Athesil does not damage lambda sensors, is easy to apply, and it is non-toxic nor flammable. Fuel and Oil resistant Water Resistant Maximum cold and heat resistance Made in Italy

Camshaft cover screw washer alu 750/101/102/105 /116

Crankshaft seal 1700-2000cc front 93

Crankshaft seal 2000-3000cc rear (105-84-12) Corteco

Original CORTECO Oil seal 105 - 84 - 12 1600 - 2000cc. 105 / 115 Models from 1986 until 1993 Alfetta + Giulietta + 75IE + 90 2,0 75 TS + 164 TS + 155 TS 2,0 V6 - 3,0 V6 GTV6 + 75V6 + 164 V6 + 155V6 Spider / GTV V6 Made in ITALY

Crankshaft seal 2000-3000cc rear (105-84-12) REINZ

Original REINZ Oil seal 105 - 84 - 12 1600 - 2000cc. 105 / 115 Models from 1986 until 1993 Alfetta + Giulietta + 75IE + 90 2,0 75 TS + 164 TS + 155 TS 2,0 V6 - 3,0 V6 GTV6 + 75V6 + 164 V6 + 155V6 Spider / GTV V6 Made in Germany

Crankshaft seal front AR 2600(106) + 2.0-3.0V6

Crankshaft oil seal front Alfa Romeo AR 2600 (Typ 106) Sprint / Spider / Berlina AR 2000 - 3000 V6 Engines GTV6 Alfa 75 V6 Alfa 90 V6 Alfa 164 V6 Alfa 155 V6 Alfa Spider / GTV V6

Crankshaft seal original 1300-2000cc front (50-35-10)

Original ELRING Crankshaft Oil seal front Alfa Romeo 750 / 101 Models 1300 - 2000cc 105 / 115 Models (4 - Cylinder) Alfetta / Alfetta GTV / Alfetta GTV4 Giulietta Alfa 75 Alfa 90 Alfa 164 Alfa 155 We recommend using only original quality Made in Germany

Cylinder head gasket 2,0 TS 8V 75 / 164 / 155 1.s

Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket 2,0 TS 8V 164 / 155 (2. series)

Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket 2,0 V6 Turbo Spider / GTV left

Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket 2,0 V6 Turbo Spider / GTV right

Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket Reinz 164 3,0 V6 24V right

Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket Reinz 3,0 V6 12V left

75 3.0 V6 SZ / RZ Zagato ES 30 164 3.0 V6 12V Spider (916) 3.0 V6 12V Original REINZ cylinder head gasket Made in Germany

Cylinder head gasket Reinz 3,0 V6 12V right

75 3.0 V6 SZ / RZ Zagato ES 30 164 3.0 V6 12V Spider (916) 3.0 V6 12V Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head gasket Reinz 3,0 V6 24V + 3,2 GTA left

Spider / GTV (916) 3.0 + 3.2 V6 24V 156 GTA 166 3.0 + 3.2 V6 24V 147 GTA GT 3.2 V6 24V Original REINZ Cylinder head gasket Genuine part. Made in Germany

Cylinder head overhaul set Alfa 75 2.0 TS + 164 2.0 TS

Cylinder head overhaul Set (without cylinder head gasket Alfa Romeo Alfa 75 2.0 TS 8V Alfa Romeo 164 2.0TS 8V

Cylinder liner seals REINZ 3000 / 3200 V6, 93 mm

Alfa 75 3,0 V6 Spider / GTV (916) 3,0 V6 Spider / GTV (916) 3,2 V6 Alfa 164 3,0 V6 Alfa 166 3,0 V6 Alfa 156 3,2 GTA Alfa 147 3,2 GTA Alfa GT 3,2 V6 ES 30 SZ / RZ

Elring gasket material kit XXL

Elring repair kit Gasket material assortment 210 x 300 mm Abil™ N is based on NBR bonded cellulose fibers. This gasket material is primarily used for sealing against hot and cold oils, greases, fuels and coolant with corrosion and antifreeze additives. Typical applications of Abil™ N Timing housings Gearboxes Valve covers Oil pans Hydraulic and pneumatic systems Chemical equipment Pumps and compressors Maximum operating temperature 120 °C EWP 207 is a gasket material based on NBR bonded synthetic organic fibers. It offers good resistance to oil and fuel and is used for sealing against hot and cold oils, greases, fuels and coolant with corrosion and antifreeze additives. Typical applications of EWP 207 Oil pans Valve covers Gearboxes Housing covers Maximum operating temperature 200 °C FW 522 is based on NBR bonded aramid fibers with a perforated steel sheet insert. This gasket material combines excellent oil and fuel resistance with high pressure resistance. Typical applications of FW 522 Exhaust pipes Exhaust manifolds Maximum operating temperature 250 °C

Elring threadlocker EL-Loc 43 medium solidity 10ml

Suitable for securing and fastening screws, nuts and studs up to M20 as well as for fastening studs and cylindrical parts. Particularly suitable for heavily loaded screws and studs. Difficult to disassemble. For blind holes, also apply into the bore. Hand-tight after approx. 10 minutes. Curing Anaerobic curing with metal contact Temperature range -55 °C to +180 °C Color Blue Contents 10 ml Breakaway torque 20 Nm Strength Medium strength

Elring threadlocker EL-Loc 70 high-strength 10ml

Suitable for securing and fastening screws, nuts and studs up to M20 as well as for fastening studs and cylindrical parts. Particularly suitable for heavily loaded screws and studs. Difficult to disassemble. For blind holes, also apply into the bore. Hand-tight after approx. 10 minutes. Curing Anaerobic curing with metal contact Temperature range -55 °C to +180 °C Color Green Contents 10 ml Breakaway torque 40 Nm Strength High strength

Elring universal sealing compound Curil T2 70ml 270

Curil™ T2 is a high-temperature sealing compound based on synthetic resin. As the solvent evaporates, the sealant forms a reliable sealing film. Curil™ T2 is ideal for flat sealing surfaces and can be used alone or in combination with soft material gaskets. Resistance to Oil Grease Fuel Coolant Cold and hot water Salt water Weak acids and alkalis Chemical base Synthetic resin Color Green Consistency Paste-like, plastically elastic after curing Maximum sealing gap 0.2 mm pH value Neutral Electrical conductivity Insulating Disassembly No bonding of components, easy disassembly Temperature resistance approx. -55 °C to +270 °C Solvent Completely solvent-free

Elring universal sealing compound Dirko HT black 20ml 315

Dirko HT black is a high-quality, high-temperature-resistant, permanently elastic single-component silicone-based sealing compound. The Dirko HT silicone engine sealant offers excellent adhesion to all common metals as well as cast iron, glass and plastics (except PE, PP and PTFE). It is particularly suitable for reliably sealing machined flat surfaces and can also be used in combination with paper gaskets to improve sealing performance. Temperature range -60 °C to +285 °C continuous, short-term up to +315 °C Maximum sealing gap up to 2 mm The sealant is resistant to a wide range of media and environmental influences. Mineral oils including additives Synthetic oils Lubricating greases Coolants UV radiation Cold and hot water Salt water Cleaning agents Weak acids and alkalis Typical applications Valve covers Oil pans Water pumps and oil pumps Clutch covers Engine covers Gear housings Crankcases Thermostat housings Flange connections Headlights and tail lights Motorcycles, scooters, quads and passenger cars The sealant is very easy to apply and process. It is applied on one side to the sealing surface and spread evenly with a finger. It seals reliably after a short time. If repairs are required later, it can be easily rubbed off when the sealing surface needs to be reopened. Packaging 70 ml tube for professional use.

Elring universal sealing compound Dirko HT black 70ml 315

Dirko HT black is a high-quality, high-temperature-resistant, permanently elastic single-component sealing compound based on silicone. The Dirko HT silicone engine sealant offers excellent adhesion to all common metals as well as cast iron, glass and plastics (except PE, PP and PTFE). It is particularly suitable for reliably sealing machined flat surfaces and can also be used in combination with paper gaskets to improve sealing performance. Temperature range -60 °C to +285 °C continuous, short-term up to +315 °C Maximum sealing gap up to 2 mm The sealant is resistant to a wide range of media and environmental influences. Mineral oils including additives Synthetic oils Lubricating greases Coolants UV radiation Cold and hot water Salt water Cleaning agents Weak acids and alkalis Typical applications include. Valve covers Oil pans Water pumps and oil pumps Clutch covers Engine covers Gear housings Crankcases Thermostat housings Flange connections Headlights and tail lights Motorcycles, scooters, quads and passenger cars The sealant is very easy to apply and process. It is applied on one side to the sealing surface and spread evenly with a finger. It seals reliably after a short time. If repairs are required later, it can be easily rubbed off when the sealing surface needs to be reopened. Packaging 70 ml tube for professional use.

Elring universal sealing compound Dirko HT Red 20ml 315

Dirko™ HT red (acetoxy curing) is a high-quality, high-temperature-resistant, single-component silicone-based sealing compound with permanently elastic properties. It offers excellent adhesion to all common metals, cast iron, plastics (except PE, PP and PTFE) and glass. Through reaction with air humidity, Dirko™ HT red cures to silicone. The product is characterized by a very wide range of applications. Resistance to Mineral oils including additives Synthetic oils Lubricating greases Coolants UV radiation Cold and hot water Salt water Cleaning agents Weak acids and alkalis Typical applications Valve covers Oil pans Water pumps and oil pumps Differential housings Gear housings Transmission oil pans Thermostat housings Timing housings Axle covers Flange connections Headlights Tail lights Battery boxes Color Red Oil resistant Yes Maximum temperature +315 °C short-term Maximum continuous temperature -60 °C to +300 °C Chemical base Acetoxy silicone Components Single component Maximum sealing gap 2.0 mm Hardness 30 ± 5 Density 1.1 ± 0.2 g/ml Curing Room temperature vulcanizing RTV Consistency Paste-like, non-sag, permanently elastic after curing pH value Neutral Electrical conductivity Insulating Elastic modulus at 100 percent 0.6 ± 0.2 N/mm2 Tensile strength 2.9 ± 0.2 N/mm2 Elongation at break 600 ± 100 percent