Aluminium plug for crankshaft 6mm

Aluminium Verschluss Stopfen für Kurbelwelle Standard 6mm 750 / 101 + 105 / 115 + 113 / 116 Typen

Attachment kit for oil cooler (with thermostat)

Stahlflex 120cm + 100cm

Attachment kit for oil cooler (without thermostat)

Bushing for crankshaft 1300 - 1600cc 20mm

Bushing for crankshaft 1300 - 2000 105 24mm

Bushing rear for crankshaft (24mm) Alfa Romeo 105 / 115 - Models Montreal

Con rod 1750 - 2000cc 105 / 115 / 116 / 75 / 155

Con rod (original Alfa Romeo) 1750cc. - 2000cc 1.8 - 2.0 Liter 105 / 115 - Models Alfetta / Giulietta + 75 + 90 Alfa 164 2.0TS 1.Series Alfa 155 1.Series

Con rod bolt set (8) 1600 / 1750 - 2000cc ORIGINAL

Clearance stock - only while supplies last Set of 8 original Alfa Romeo connecting rod bolts including nuts 1750cc - 2000cc also suitable for 1600cc Alfa Romeo models: Giulia (101) 1600cc Giulia GT Bertone Spider Berlina Zagato Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 OE numbers: 60507023 60507024 Connecting rod bolts and nuts must always be replaced. Do not use cheap products from the Far East.

Con rod nut 1600 - 2000 cc.

Con rod nut Alfa Romeo 1600cc. 1750cc. 2000cc.

Connecting rod Racing 1600cc. GTA / 105 / 101 (FIA)

Conrod Racing ARROW Version I - Beam Alfa Romeo 1600cc 101 - Models 105 / 115 - Models 1600 GTA (FIA - Compliant) Alfetta Giulietta Our connecting rods are machined to our exclusive design by Arrow precision, a leading manufacturer with over 30 years experience in the Motorsport arena, including Formula 1, Le Mans, WRC and WTCC. They are manufactured to our specification of double air re-melted EN24 (817M40) steel forgings, hardened & tempered to X condition. Our expertise with racing parts has been developed over a number of years and is the result of our extensive experience of engine tuning. The I-beam design makes them lighter than the H-beam rods. The rods are shot peened and rumbled using an automated process to increase fatigue strength and durability, crack detected and balanced into matched engine sets. All rods are fully CNC machined in England, supplied with ARP con rod bolts, and are subjected to vigorous CMM inspection in a temperature controlled inspection department prior to final dispatch. These new I-beam rods are FIA compliant!

Connecting rod Racing 1750 / 2000 Nord + Alfetta + 75

Conrod Racing ARROW Version I - Beam 600 gram Alfa Romeo 1750 - 2000cc 105 / 115 - Models Alfetta Giulietta Alfa 75 Our connecting rods are machined to our exclusive design by Arrow precision, a leading manufacturer with over 30 years experience in the Motorsport arena, including Formula 1, Le Mans, WRC and WTCC. They are manufactured to our specification of double air re-melted EN24 (817M40) steel forgings, hardened & tempered to X condition. Our expertise with racing parts has been developed over a number of years and is the result of our extensive experience of engine tuning. The rods are shot peened and rumbled using an automated process to increase fatigue strength and durability, crack detected and balanced into matched engine sets. All rods are fully CNC machined in England, supplied with ARP con rod bolts, and are subjected to vigorous CMM inspection in a temperature controlled inspection department prior to final dispatch.

Crankshaft 1600 Sport 105 models + GTA + 101

Our 1600 GTA crankshafts are machined to our exclusive design by Arrow precision, a leading crankshaft manufacturer with over 30 years experience in the Motorsport arena, including Formula 1, Le Mans, WRC and WTCC. They are manufactured to our specification that has been developed over a number of years and is the result of our extensive experience of tuning the 1600 GTA engine. The cranks are manufactured from a solid billet of very high specification EN40B (722M24) material. The material is specially selected to ensure that it is particularly clean ensuring that oxide and sulphide content is minimised. This gives major improvement in the strength and ductility of the material and greatly improves fracture resistance. Our material should not be confused with other (cheaper) steels that are used in crankshaft manufacture! The design incorporates eight counterweights to increase reliability at high rpm by reducing the loads on the crank bearings generated by the connecting rod and piston inertia. The counterweights are knife edged to reduce drag and are pocketed to remove inefficient mass, helping to reduce overall inertia and improve throttle response. The oil supply galleries are fully linked through the crank and feature new outlet positions in the big ends to optimise the supply of oil to the connecting rod bearings. The crank is gas nitrided to increase the hardness of the bearing surfaces and dynamically balanced to race engine specification. We firmly believe that you will not find a better crank on the market!!!

Crankshaft ARROW Sport AR 2000

Our 2000cc. Alfa Romeo crankshafts are machined to our exclusive design by Arrow precision, a leading crankshaft manufacturer with over 30 years experience in the Motorsport arena, including Formula 1, Le Mans, WRC and WTCC. They are manufactured to our specification that has been developed over a number of years and is the result of our extensive experience of tuning the 1600 GTA engine. The cranks are manufactured from a solid billet of very high specification EN40B (722M24) material. The material is specially selected to ensure that it is particularly clean ensuring that oxide and sulphide content is minimised. This gives major improvement in the strength and ductility of the material and greatly improves fracture resistance. Our material should not be confused with other (cheaper) steels that are used in crankshaft manufacture! The design incorporates eight counterweights to increase reliability at high rpm by reducing the loads on the crank bearings generated by the connecting rod and piston inertia. The counterweights are knife edged to reduce drag and are pocketed to remove inefficient mass, helping to reduce overall inertia and improve throttle response. The oil supply galleries are fully linked through the crank and feature new outlet positions in the big ends to optimise the supply of oil to the connecting rod bearings. The crank is gas nitrided to increase the hardness of the bearing surfaces and dynamically balanced to race engine specification. We firmly believe that you will not find a better crank on the market!!!

Cylinder liner 1600 / 1800cc. 83mm Corsa (1 cut)

Racing Liner Corsa 83mm (1 cut) With these 83mm liners, specially manufactured for OKP, 1600cc engines can be expanded to approx. 1800cc displacement while retaining the original 1600cc crankshaft. Attention, 2x with one cut and 2x with two cuts are required. Order the matching racing pistons and cylinder head gasket! AR 10 017 341 AR 10 052 110

Cylinder liner 1600 / 1800cc. 83mm Corsa (2 cuts)

Racing Liner Corsa 83mm (2 cuts) With these 83mm liners, specially manufactured for OKP, 1600cc engines can be expanded to approx. 1800cc displacement while retaining the original 1600cc crankshaft. Attention, 2x with one cut and 2x with two cuts are required. Order the matching racing pistons and cylinder head gasket! AR 10 017 341 AR 10 052 110

Cylinder liner 1600cc. 78,80mm Aluminium / Nikasil

Now exclusively available from OKP High-performance cylinder liner 78.80 mm Aluminum version / Nikasil-coated Extreme weight reduction Weight only 530 grams compared to 1350 grams for the cast iron liner: YReduction of engine weight by over 3 kg - a noticeable advantage in performance and fuel efficiency! Alfa Romeo 1600cc 105 / 115 / GTA Nikasil is a special coating made of nickel and silicon carbide (Ni-SiC), primarily used for coating cylinder liners in engines. The name Nikasil is a trademark originally introduced by the company Mahle. Advantages of Nikasil: Extremely high wear resistance Low friction: increased performance and reduced fuel consumption Lower weight Better heat dissipation than cast iron liners Commonly used in high-performance and racing engines, as well as in sports cars (e.g. Ferrari, Porsche, etc.). Nikasil®-coated (registered trademark of Mahle) - for maximum wear resistance and performance. Made in Italy

Cylinder liner 1600cc. 78,80mm oversize Corsa

Special Diameter 78,80mm

Cylinder liner 1600cc. 78mm (orig. Mahle)

Cylinder liner (Original Mahle) 1600cc. 78mm Alfa Romeo 101 / 105 / 115 / 116

Cylinder liner 2000cc. 84,50mm oversize

Cylinder Liner 84,50MM Alfa Romeo 2000cc

Cylinder liner 2000cc. 84,50mm Racing CrMo

Manufactured exclusively for OKP Cylinder Liner Racing Reinforced Version Chrome Molybdenum BORE: 84,50MM Tensile strength 290 - 320 N/sqmm Hardness 220 - 230 HBS Alfa Romeo 2000 Carburetor engines 105 / 115 - Models and others. To be used also for our forged Sport Pistons AR 10 017 313 AR 10 017 317 Made in Italy

Cylinder liner seal 1300cc (74mm)

Our cylinder liner seals ensure a perfect fit and reliable sealing between liner and block. They effectively prevent leaks of gases, oil, and coolant - for lasting engine performance and durability. Alfa Romeo 1300cc (74mm): 750 Giulietta 101 Giulietta GT Bertone Spider Giulia Junior Zagato OKP uses superior quality materials, strictly no asbestos, studied with different technologies to obtain maximum sealing in all conditions. Premium Quality Perfect Spare Part for the Original Unbeatable Price Quality Ratio Made in Italy

Cylinder liner seal 1600 - 1800cc (78-80mm)

Our cylinder liner seals ensure a perfect fit and reliable sealing between liner and block. They effectively prevent leaks of gases, oil, and coolant - for lasting engine performance and durability. Alfa Romeo 1600cc - 1800cc (78 - 80mm): 101 Giulia GT Bertone Spider Giulia Berlina Montreal Junior Zagato Alfetta / GT / Giulietta Alfa 75 OKP uses superior quality materials, strictly no asbestos, studied with different technologies to obtain maximum sealing in all conditions. Premium Quality Perfect Spare Part for the Original Unbeatable Price Quality Ratio Made in Italy

Cylinder liner seal 2000cc (84mm)

Our cylinder liner seals ensure a perfect fit and reliable sealing between liner and block. They effectively prevent leaks of gases, oil, and coolant - for lasting engine performance and durability. Alfa Romeo 2000cc (84mm): GT Bertone Spider Berlina Alfetta / GTV / Giulietta Alfa 75 OKP uses superior quality materials, strictly no asbestos, studied with different technologies to obtain maximum sealing in all conditions. Premium Quality Perfect Spare Part for the Original Unbeatable Price Quality Ratio Made in Italy

Engine block strengthening plate 101 / 105 / 116 + 75

Motorsport crankshaft girdle plate - laser-cut steel construction Alfa Romeo 101 / 105 / 116 / 75 types This high-strength, laser-cut steel plate reinforces the entire crankshaft assembly and provides significantly greater stability in the main bearing area. Installation takes place between the engine block and the oil pan at the main bearing caps. The additional reinforcement reduces vibrations in the crankshaft assembly and significantly decreases the load on the crankshaft main bearings - a decisive advantage for high-performance or high-revving engines. Performance advantages: Significantly stiffer crankshaft assembly Reduced engine vibrations Lower bearing wear Higher load capacity of the engine block Additionally, the plate acts as an oil scraper and prevents oil from sloshing away from the oil pump during fast cornering. This ensures stable oil supply even under high lateral forces. Proven in motorsport Ideal for high-performance and tuned engines

Engine mount complete exhaust side 105 models

Engine mount complete exhaust side 105 RACING

Motoraufhängung Verstärkt RACING 75 Shore Alfa Romeo 105 / 115 Typen

Engine mount complete intake side 105 models

Engine mount complete intake side 105 RACING

Motoraufhängung Verstärkt RACING 75 Shore Alfa Romeo 105 / 115 Typen

Flywheel bolt 1300 - 1750cc 8 holes flywheel

Flywheel bolt for 8 hole flywheel Alfa Romeo 1300 - 1750cc 750 / 101 - Models 105 - Models

Flywheel bolt 1600 - 3000cc (6 hole flywheel)

Flywheel Sport steel 6 holes 2000cc. modific. 5,95 kg

Sport flywheel Steel Lightwheel 5,95 KG Starter ring 105 teeth To convert cars with mechanical clutch to a 2000cc. engine as Giulietta / Giulia 750 / 101 and others.

Flywheel Sport steel 6 holes hydr. clutch 6,5 kg

Sport flywheel steel lightweight 6,5 kg Version for hydraulic clutch Starter ring 130 teeth 6 - holes mounting 1300 - 2000cc 105 / 115 Bertone Spider Spider (Bj. 1990 - 93) Giulia Berlina

Flywheel Sport steel 8 holes hydr. clutch 7,1 kg

Sport flywheel Steel Lightweight 7,1 KG Version for hydraulic clutch Starter ring 110 teeth Diameter 215mm Material 42CrMo4 8 - holes mounting Alfa Romeo 1300 - 1750cc 105 / 115 Please note: Our flywheels are made in one piece including starter ring Made in Italy

Flywheel Sport Steel 8 holes mechanical clutch 6,20 kg

Sport flywheel Steel Lightweight 6,20 KG Version for mechanical clutch Starter ring 105 teeth Diameter 200mm Material 42NiCrMo4 8 - holes mounting Alfa Romeo 1300 - 1600cc 105 / 115 Please note: Our flywheels are made in one piece including starter ring Made in Italy

Front crankshaft pulley tab washer 101 / 105 / 115 + Alfetta

Front crankshaft pulley tab washer Alfa Romeo 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 75

Gasket ring for oil sump plug

K&N Filter for oil catch pan alu

19mm Filter / Ø 51mm / Höhe 38mm

Little end bearing 1300cc 750 / 101 / 105

Little end bearing 1600 / 1750 / 2000 + 2,0 V6 - 3,0 V6

Con rod bushing Original Glyco 1600cc. 1750cc. 1800cc. 2000cc. 2000 V6 2500 V6 3000 V6

Metal safety tab washer for con rod nuts 1300 - 1750

Conrod Tab washer Alfa Romeo 1300 - 1750cc. 101 - Models 105 / 115 - Models Alfetta Giulietta usw. 8 pieces per engine. We recommend to replace any tab washer once it has been used.

Metal safety tab washer for flywheel bolts (6 holes)

Washer ring for 6 Bolt Flywheel Alfa Romeo 2000cc 105 / 115 - Models 1600cc. Spider 1990 - 1993

Minimum oil pressure light switch 105 / 115 / 116 / 75

Oil pressure switch Alfa Romeo 105 / 115 - Typen Alfetta GTV4 / GTV6 Giulietta Alfa 75 Alfa 90 Alfa 155 Alfa 164 Spider / GTV 2.0 V6 Turbo Alfa SZ / RZ

Nut for crankshaft M20 1300 - 2000 105 115 116

Oil catch pan alu 2l 200 x 150 x 70 mm

2 Ltr Alloy catch tank Sight glass 3x 13mm Inlet, Outlet & Breather M8 Drain boss 200 x 150 x 70 mm

Oil catch pan alu 2l universal with filter and mounting

Oil cooler Adapter flange 105 / 115 2nd Series

Oil cooler adapter flange Alfa Romeo 1300-2000cc. 4 -cylinder engines 105 / 115 Alfetta Giulietta Alfa 75 Alfa 90 To use with following oil filters AR 35 002 006 or AR 35 002 005 or AR 35 002 007

Oil cooler adaptor flange GTA / GTAm / 105 1. serie

Oil cooler adapter flange Comes with the correct fittings Aluminium Race connections M16 x 1,5mm 750 / 101 - models GTA 1300 - 1600 GTAm 1750 105 - Models 1. Series

Oil cooler Race aluminium 1300 - 1600 GTA

Dimensions: 320 x 95 x 30 mm Weight 0,85 kgs

Oil dipstick Alfa Romeo 101 / 105 / 115 / 116 (456mm)

Oil dipstick Total length 456 mm Length to stopper 305 mm Alfa Romeo 101 - Models 105 / 115 - Models 116 - Models Please check oil level after dipstick renewal

Oil dipstick Alfa Romeo 105 / 115 / 116 / 75 (495mm)

Oil dipstick Total length 495 mm Length to stopper 345 mm Alfa Romeo 105 / 115 - Models 116 - Models Alfa 75 Please check oil level after dipstick renewal

Oil filler cap with gasket 750 / 101 / 105 / 116

High-quality galvanized oil filler cap - reinforced version Precisely manufactured oil filler cap made of galvanized steel with OLIO embossing. Unlike many reproductions made from thinner material, this cap has the correct material thickness, ensuring a stable and tight fit that will not loosen with heat or vibration. Includes a durable cork gasket for perfect sealing and long service life. Alfa Romeo 1900 - types 2000 - types 2600 - types 750 / 101 - types 105 / 115 - types Alfetta Giulietta Alfa 90 Made in Europe

Oil filler cap with ventilation GTA / 101 / 105

Oil Filler Cap with Ventilation GTA - zinc-plated (Autodelta Version) High-quality, precisely manufactured oil filler cap made of zinc-plated steel. This reinforced racing version has been specially developed for demanding use in motorsport and high-performance road applications. Unlike many reproductions made from material that is too thin, this cap has the correct material thickness, ensuring a stable, vibration-resistant and heat-resistant fit. This guarantees a secure and tight seal even at high temperatures and engine speeds. The cap features an integrated ventilation system in GTA style, providing optimized crankcase ventilation - ideal for use in racing environments and performance-tuned engines. Includes a durable cork gasket for perfect sealing and long service life. Suitable for the following Alfa Romeo models: 1900 - types 2000 - types 2600 - types 750 / 101 - types 105 / 115 - types + GTA / GTAm Alfetta Limousine Alfetta GT / GTV / GTV6 Giulietta Made in Europe

Oil filler cap with ventilation GTA / 101 / 105 INOX

Oil Filler Cap with Ventilation GTA - Polished Stainless Steel (Autodelta Version) High-quality, precisely manufactured oil filler cap made of polished stainless steel. This reinforced racing version has been specially developed for demanding use in motorsport and high-performance road applications. Unlike many reproductions made from material that is too thin, this cap has the correct material thickness, ensuring a stable, vibration-resistant and heat-resistant fit. This guarantees a secure and tight seal even at high temperatures and engine speeds. The cap features an integrated ventilation system in GTA style, providing optimized crankcase ventilation - ideal for use in racing environments and performance-tuned engines. Includes a durable cork gasket for perfect sealing and long service life. Suitable for the following Alfa Romeo models: 1900 - types 2000 - types 2600 - types 750 / 101 - types 105 / 115 - types + GTA / GTAm Alfetta Limousine Alfetta GT / GTV / GTV6 Giulietta Made in Europe

Oil pan lower part 1300 - 2000cc 105 models Alloy

Oil pan lower part (Aluminium) 1300 - 2000 105 / 115 Bertone GT / GTV Giulia Super / Nuova Spider 1300 - 2000 (1966 - 1993) Berlina 1750 - 2000 Zagato Junior

Oil pan upper part 1300 - 2000cc 105 models

Oil pan upper part Alfa Romeo 105 / 115 - Models Giulia Spider Bertone Berlina Zagato

Oil pressure sender 1300 - 2000 105/115/116 Veglia

Oil Pressure Sender Veglia 1. series

Oil pressure sender 105 / 115 / 116 (Jaeger)

Oil Pressure Sender Jaeger + Veglia 2. series GT Bertone Giulia Berlina Spider Montreal Junior Zagato Alfetta / Giulietta GTV / 6 Lancia Fulvia

Oil pump 1300 - 2000cc 105 / 115 series

Oil Pump 105 / 115 1300 - 2000cc. models

Oil sump guard 105 - models 105

Oil Sump Guard 105 / 115 -Models (Not Montreal)

Oil sump plug differential + gearbox 750 / 101 / 105

Oil drain plug / oil filler plug for differential and gearbox Magnetic sealing plug for secure sealing of the oil drain or oil filler opening. Suitable for Alfa Romeo: 2600 series (oil pump) 750 / 101 series 102 / 106 series 105 / 115 series Alfetta / GTV Giulietta Alfa 75 Thread specification M22 × 1.5 The integrated magnetic element collects metallic wear particles circulating in the oil system and helps reduce wear within the drivetrain.

Oil sump plug differential + gearbox 750 / 101 / 105

Oil drain plug / oil filler plug for differential and gearbox Sealing plug for secure closure of the oil drain or oil filler opening, also used in the cylinder head. Suitable for Alfa Romeo: 2600 series (oil pump) 750 / 101 series 102 / 106 series 105 / 115 series Alfetta / GTV Giulietta Alfa 75 Thread specification M22 × 1.5

Oil sump plug engine (with magnet) 105 / 115 / Montreal

750- 101 Models 2600 (106) - Models 105 / 115 - Models Montreal Alfetta / Giulietta Alfa 75 Alfa 90

Oil.- / water - temp. sender 750 / 101 / 2000 / 2600

Oil and Water Temperature Sender Alfa Romeo 1900 Alfa Romeo 2000 (Typ 102) Alfa Romeo 2600 (Typ 106) Alfa Romeo Giulietta / Giulia 750 - 101 Alfa Romeo 105 1. Series M16 x 1.5 2200OHM Made in Italy

Piston and liner 1300cc 74mm Original

Original Nüral / Federal Mogul production.

Piston and liner 1600cc 78mm Original

Original Nüral / Federal Mogul production.

Piston and liner 1750cc 80mm Original

Original Nüral / Federal Mogul production.

Piston and liner 2000cc 84mm IE until 89

Motronic piston and liner set 84mm 2000cc injection models until 89

Piston and liner 2000cc 84mm Original

Original Nüral / Federal Mogul production.

Piston and liner 2000cc 84mm Sport (10,4:1) Original

Original Nüral / Federal Mogul production.

Pulley for crankshaft aluminium 360° scaling (105mm)

1300 - 1600cc engines 101 / 105 / GTA models Diameter 105mm Aluminium pulley with 360° scaling Special coated 50% weight reduction

Pulley for crankshaft aluminium 360° scaling (125mm)

Lightweight Crankshaft Pulley 125mm (Aluminium) 1750 - 2000cc engines 105 / 115 models Diameter 125mm Aluminium pulley with 360° scaling Special coated Weight 390 grams Made in Italy

Racing piston (1 pc.) 1300cc 74mm 750 / 101 / 105

Exclusive to OKP Forged slipper pistons / motorsport specification Weight: 427 grams Compression ratio: 11.5 : 1 Forged aluminium piston 74 mm Alfa Romeo 1300 cc carburettor models: 750/101 Giulietta / Giulia GT Bertone Spider Giulia Junior Zagato Made in Italy

Racing piston (1 pc.) 2000cc 84,50mm 105 / 115 + Alfetta

Pistal Racing exclusively for OKP Forged Piston / Motorsport Weight 427 Gramm Compression ratio: 12 : 1 Forged Sport Piston 84,50mm Alfa Romeo 2000cc. Carburetor - Models Spider Berlina Bertone Giulia Alfetta Alfetta GTV Alfa 75 Alfa 90 Giulietta Made in Italy

Racing piston (1x) 1750 / 1800 80mm 105/115 + 116 + 75

Pistal Racing exclusively for OKP Forged slipper pistons / Motorsport Alfa Romeo 1750 - 1800cc carburetor models: GT Bertone Spider Giulia Berlina Alfetta / Giulietta Alfetta GTV Alfa 75 Alfa 90 80mm forged aluminum pistons: > Weight: 410 grams > Compression ratio: 12 : 1 > Complete with piston pins > High performance piston rings > 2 x piston pin circlips Made in Italy

Racing piston 1600 / 1800cc. 83mm Corsa OKP / Pistal

Pistal RACING exclusive for OKP Forged piston 83mm (418 Gramm) Special pistons to modify 1600cc. engines up tp 1800cc. For use with the original 1600 crankshaft. Order the matching cylinder liners and cylinder head gasket! AR 10017740 AR 10017750 AR 10052110

Racing piston 1600 78mm Corsa OKP / Pistal Racing

Pistal Racing exclusively for OKP Forged Piston / Motorsport Weight 369 Gramm Compression ratio: 12:1 Forged Sport Piston 78mm Alfa Romeo 1600cc. Carburetor - Models Spider Berlina Bertone Giulia Alfetta Alfetta GTV Alfa 75 Alfa 90 Giulietta Made in Italy

Rebuilt crankshaft with bearings 1300, 105

Caution EUR 250,- net

Rebuilt crankshaft with bearings 1600 105

Die Kaution für dieses Teil beträgt EUR 250,- (exkl. MwSt.) und wird bei Rückgabe Ihres austauschfähigen Altteils zurückerstattet. Achtung: Altteile immer ausreichend frankiert an uns zurücksenden!

Rubber block for oil pan 1300 - 2000cc 105 / 115

T profile Rubber block for upper oil pan Alfa Romeo 105 / 115 - models

Safety tab for flywheel bolt (8 holes)

Safety tab for flywheel bolt (8 holes) Alfa Romeo 101 - Models 1300 - 1750cc 105 / 115

Safety tab washer crankshaft 1. - 4. main bearing

Safety washer for main bearings 1 - 4. Alfa Romeo 750 / 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 75 Alfa 90 Alfa 155 Alfa 164 8 pieces needed

Sealing ring oil pump 1300 - 2000 105/115 +A + 75

Sealing ring oil pump in timing cover Alfa Romeo 1300 - 2000cc. 750 / 101 - Models 105 / 115 - Models Alfetta Alfa 75 Alfa 90 Alfa 164

Set (4 pcs.) Pistons 1300cc. 74mm Original

Limited Stock Set (4 pcs.) Original Pistons (without liners) Alfa Romeo 1300cc.74mm 105 / 115 - Models Original Nüral / Federal Mogul production.

Set (4 pcs.) Pistons 1750cc 80mm Original

Limited Stock Set (4 pcs.) Original Pistons (without liners) Alfa Romeo 1750cc. 105 / 115 - Models Alfetta Giulietta Original Nüral / Federal Mogul production.

Set (4 pcs.) Pistons 2000cc 84mm Sport (10,4:1) Original

Limited Stock Set (4 pcs.) Original Pistons (without liners) Sport 10,4:1 Compression Alfa Romeo 2000cc. 105 / 115 - Models Alfetta Giulietta Original Nüral / Federal Mogul production.

Set con rod bearings 1300cc 010

Set con rod bearings 010 oversize Alfa Romeo 1300cc. 750 / 101 Giulietta + Giulia 105 / 115 - Models Giulietta 1300

Set con rod bearings 1300cc 020

Set con rod bearings 1300cc 030

Set con rod bearings 1300cc 040

Set con rod bearings 1300cc Std

Set con rod bearings 1600 - 2000cc 010

Set con rod bearings Alfa Romeo 1600 - 2000cc. 1. Oversize 010 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 Alfa 155

Set con rod bearings 1600 - 2000cc 010 orig. Mahle

NOS - New old Stock Limited Quantity Set con rod bearings Original MAHLE Alfa Romeo 1600 - 2000cc. 1. Oversize 010 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 Alfa 155

Set con rod bearings 1600 - 2000cc 020

Set con rod bearings 1600 - 2000cc 020 Vandervell

NOS Set con rod bearings Vandervell Limited stock 101 / 105 / 115 - Models 1600 - 2000cc.

Set con rod bearings 1600 - 2000cc 030

Set con rod bearings 1600 - 2000cc 040

Set con rod bearings 1600 - 2000cc Std

Set con rod bearings KING XP Racing 1600 - 2000cc (010)

Set Con Rod Bearings Racing (010 - 1. Oversize) KING XP Racing Series Alfa Romeo 1600 - 2000cc. 1. OVERSIZE 101 - Typen 105 / 115 - Typen Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 Alfa 155 Successful race engine builders are constantly pushing the limits of load capacity to new levels. Race bearings today inevitably need to match these demands with more competitive bearings. At King Racing we met the challenge with the XP high performance bearings series. The XP series is a line of bearings with advanced metallurgical and geometric technologies that meet extreme performance loads. It was developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King Racings XP series features pMax Black™, a unique tri-metal structure that is 24% harder than any other conventional tri-metal race bearing. pMax Black™ together with the XP geometric features are the ideal combination for performance racing.

Set con rod bearings KING XP Racing 1600 - 2000cc Std

Set Con Rod Bearings Racing STANDARD KING XP Racing Series Alfa Romeo 1600 - 2000cc. in STANDARD / STD 101 - Typen 105 / 115 - Typen Alfetta Giulietta Alfa 75 Alfa 90 Alfa 164 Alfa 155 Successful race engine builders are constantly pushing the limits of load capacity to new levels. Race bearings today inevitably need to match these demands with more competitive bearings. At King Racing we met the challenge with the XP high performance bearings series. The XP series is a line of bearings with advanced metallurgical and geometric technologies that meet extreme performance loads. It was developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King Racings XP series features pMax Black™, a unique tri-metal structure that is 24% harder than any other conventional tri-metal race bearing. pMax Black™ together with the XP geometric features are the ideal combination for performance racing.

Set crankshaft thrust washers 1300-2000cc 0.005

Set Thrust Washers (0.005) Alfa Romeo 1300 - 2000cc. 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 90 Alfa 75 Alfa 164 Alfa 155

Set crankshaft thrust washers 1300-2000cc 0.010

Set Thrust Washers (0.010) Alfa Romeo 1300 - 2000cc. 101 - Models 105 / 115 - Models Alfetta Giulietta Alfa 90 Alfa 75 Alfa 164 Alfa 155