Cam follower ARROW 105 / 116 / 75 / 164 / 155 / 166

ARROW High Perfomance Cam Follower Please use only High Quality cam followers. Cheap reproductions may cause engine damage! Was used in Alfa Romeo 4 - cylinder + 6 - cylinder 12V engines 101 models 105 / 115 / Montreal 113 / 116 Alfetta / GTV / Giulietta 75 IE / TS / V6 SZ / RZ Zagato ES 30 164 TS + V6 155 TS 8V Spider / GTV V6 166 2,0 V6 TB

Cam follower ARROW 105 / 116 / 75 / 164 / 155 / 166 DLC

DLC - Coated ARROW High Perfomance Cam Follower Please use only High Quality cam followers. Cheap reproductions may cause engine damage! Was used in Alfa Romeo 4 - cylinder + 6 - cylinder 12V engines 101 models 105 / 115 / Montreal 113 / 116 Alfetta / GTV / Giulietta 75 IE / TS / V6 SZ / RZ Zagato ES 30 164 TS + V6 155 TS 8V Spider / GTV V6 166 2,0 V6 TB

Cam follower standard 105 / 116 / 75 / 164 / 155 / 166

Was used in Alfa Romeo 4 - cylinder + 6 - cylinder 12V engines 101 models 105 / 115 / Montreal 113 / 116 Alfetta / GTV / Giulietta 75 IE / TS / V6 SZ / RZ Zagato ES 30 164 TS + V6 155 TS 8V Spider / GTV V6 166 2,0 V6 TB

Camshaft 1300-2000cc (105 48 032 00 00)

European specification 1750 & 2000 engines Original number 105 48 032 00 00

Camshaft 1300-2000cc (O.E. 105 02 03200 01)

O.E. 105020320001 1300 - 2000 105 / 115 Inlet / Exhaust 1600 - 2000 Alfetta Inlet / Exhaust 1300 - 2000 Giulietta Inlet / Exhaust 1600 - 2000 Alfa 75 carburettor Inlet / Exhaust Spider 2.0 IE Exhaust Alfa 75 1.8 IE Exhaust Alfa 75 1.8 Turbo Exhaust

Camshaft sprocket lock nut 1300 - 2000cc

Camshaft sprocket lock nut Alfa Romeo 1300 - 2000cc. 101- Models 105 / 115 - Models Alfetta Giulietta GTV Alfa 75 Alfa 90 Alfa 164

Chain lock 750 / 101 / 105 / 115 / 116 / 75 / 164 / 155

Elring Valve shaft seal 1300-3000cc (9mm)

OE Elring Valve guide stem seal green (9mm) Reinforced version - metal sheathed Inlet / exhaust valve guide 1300 - 2000cc. 2.0V6 - 2.5V6 - 3.0V6 105 / 115 - models Montreal Alfetta Alfetta GT / GTV Giulietta Alfa 75 Alfa 90 Alfa 155 Alfa 166 Made in Germany

Exhaust valve 1300cc, 101, 105, 34 mm

Exhaust valve 1600 - 1750cc 101 / 105 / 116 (37 mm)

Exhaust valve 2000cc 105 / 115 / 116 (40mm)

Exhaust valve guide oversize (9mm)

Exhaust valve guide std 101 / 105 / 116 / 75 (9mm)

Exhaust valve seat (unleaded) 1300cc (35,77mm)

Exhaust valve seat (unleaded) 2000cc (41,45mm)

Intake valve 1300cc 101 / 105 (37mm)

Intake valve 1600 - 1750cc 101 / 105 / 116 (41 mm)

Intake valve 2000cc 105 / 115 / 116 (44mm)

All 2000cc models except Spider IE 90 - 93 44mm diameter

Intake valve guide oversize 101 / 105 / 116 / 75 (9mm)

Intake valve guide std 101 / 105 / 116 / 75 (9mm)

Intake valve seat (unleaded) 1300cc (38,95mm)

Intake valve seat (unleaded) 2000cc (45,45mm)

Intake valve Sport 2000cc (45mm)

chromed shafts, hardened for long life. shaft diameter +0.02 mm over standard size, ideal for use with lightly worn guides. step at shaft end +1.00 mm longer, so valve can be shortened without any risk of the shim fouling the collet. valve length +0.5 mm, ideal for reground camshafts. Ideal for use with 75TS valve springs at a maximum valve lift of 12.00 mm. Please note: Spring geometry should always be checked when using high lift cams. 45° valve-seat angle gives up to 10 % better flow during high valve lift by optimizing the valve-seat angles. Valve base diameter: 45 mm Maximum utilization of valve-seat area. Strict quality control, serial production, manufacturer ISO-accredited. Grindable to 30° valve-seat angle without problems OK for modification for use in Gr.1 racing Standard size spark plugs can be used with these valves. Made in Italy

Lower chain tensioner 2600 / Montreal / 105 models

Endlich vorbei mit dem Rasseln der unteren Steuerkette. Da von Alfa Romeo werksseitig kein Kettenspanner für die untere Kette verbaut wurde und diese nicht spannbar war, kam es sehr häufig zu lautem Rasseln aus dem Kettenkasten. Ausserdem verschleissen bei zu langer Kette die Steuerräder der Ketten übermäßig und es kann zu Motorschäden kommen. Das Wechseln der unteren Steuerkette ist sehr aufwendig, da beim Erneuern der gesamte vordere Steuerdeckel inklusive Riemenscheibe usw. aus- und eingebaut werden muß. Abhilfe verschafft hier unser mechanischer Kettenspanner, welcher lange Zeit für die richtige Spannung der Kette sorgt.